• Incl.Excl.
    TAX
  • Customer service
    0
    Close

    Categories

    Filters

      Rear lamps for Trailer and Protective racks

      Want to replace your trailer rear lamps quickly and easily? Here you will find the complete range of Trailer Rear lamps sorted by brand. All available directly from stock. Show more

      Brands

      Price

      -
      143 Products
      Radex 6800 left 160x220x60 mm
      In stock
      €21,95
      View
      LED Rear lamps left - 244x149x48 mm
      In stock
      €37,95
      View
      Aspock Multipoint 2 right - 5-pole connector
      In stock
      €22,95
      View
      Radex 6800 Right 160x220x60 mm
      In stock
      €21,95
      View
      Aspock Multipoint 5 right - 5-pole connector
      In stock
      €19,95
      View
      Radex 5800 Right 220x140x60 mm
      In stock
      €13,95
      View
      Radex 2900 left 180x240x60 mm

      Radex 2900 left 180x240x60 mm

      Radex 2900 Left 180x240x60 mm - vertical mountin...
      In stock
      €24,95
      View
      Aspock Multipoint 1 right - 5-pole connector
      In stock
      €22,95
      View

      Rear lamps trailer & protection

      Do you recognise that? You drive backwards just a little too casually and you unknowingly hit a bollard or other object. Naturally, this is very frustrating! Unfortunately, it is something that happens to almost everyone from time to time. This often results in the rear lamp of the trailer breaking down. Of course, there are also other reasons for the trailer rear lamp not working properly. Fortunately, with most brands, you can easily order a rear lamp and replace it yourself! Prevent future damage with the purchase of Rear lamp protection.

      Tip: Save time and money and only replace the part that is broken!

      What should you pay attention to when buying Rear lamps for trailers?

      First of all, it is important to pay attention to the dimensions of the trailer rear lamp. After all, if you are going to replace one bulb, it is obviously essential to reorder the same type of Rear lamp Trailer. Also pay attention to the connection of the lamp. There are handy plug-and-play kits available that make self-installation possible for everyone. Actually, you can easily connect the Trailer Rear lamp to any car equipped with a 7-pin plug connection. You do this by plugging the Wiring harness into the connectors of the Rear lamp Trailer and all functions are then directly supported. Did you accidentally hit a pole? Of course, this happens to everyone from time to time. Then it is not always necessary to replace the entire Rear lamp. If the rear light still works as it should, it is better to order a separate cover for your Rear lamps Trailer. This saves a lot of money and also saves time!

      LED Rear lamps or traditional trailer rear light?

      LED lights are becoming increasingly popular these days. One advantage of LED lights compared to traditional lights is that they have many more burning hours. In fact, the burning hours are up to 30 times longer than normal light sources. Another advantage is that LED is a solid product, which means it does not break down easily. It is also common knowledge that the LED trailer Rear lamp gets less hot. Furthermore, it is suitable for different voltages, also known as Multivolt. As a final advantage, the LED trailer rear light is more environmentally conscious and much brighter than traditional trailer lights. Here are the advantages in a nutshell:

      Advantages LED lights

      • More burning hours
      • Solid product
      • Becomes less hot
      • Suitable for different voltages
      • More environmentally friendly and brighter

      Aspöck rear lamps trailer multipoint

      Active in trailer lights since 1977 and over the years have become the market leader and leading supplier for most trailer brands. Rear lamps from Aspock are used by many trailer manufacturers in the final assembly. Simply because it is easy to fit and is the best available in the market in terms of moisture resistance. The Multipoint 1 Rear lamp has been in use since 1996 and is still used by manufacturers in the aftermarket. It was the first Rear lamp you could also connect with a connector connection. The aspock Multipoint 1 Rear lamp is characterised by its right angles. With the Multipoint 2 model and also Multipoint 3, you see more rounded corners. So you can know which type you have by the shape of the Rear lamps. It is also mentioned on the glass and otherwise also on the back of the unit. You can easily replace the unit because these bulbs have a connector connection. This is a plug-and-play system that you can easily replace yourself. You can also choose to replace a whole set right away. So you have a new Wiring harness with 2 new units. No loose wires but a plug & play connection.

      RADEX & Hella Trailer Rear lamps

      Radex has been producing Lights in Italy since 1986. Radex has been producing Lights for major manufacturers since 1986, which they do in Italy. Since Radex was founded, they have been very successful in making very reliable Lights. The Radex trailer Rear lamps are very popular this is because of the excellent price/quality ratio. Lights from Hella are widely used for trailers and vehicles. Hella has many different types of Lights in its range. These are recognised and therefore meet the legal requirements.

      Prevent future damage with your Trailer Rear lamps

      An accident is in a small corner. You cannot always prevent this. The solution is Protective racks for your trailer rear lamps. They are a cheap solution and easy to install. We have five different protective racks available. All with different sizes, so there is always a suitable Protective rack for your Rear lamps Trailer available.

      Compare 0

      Add another product (max. 5)

      Start comparison